PMT meets diversified customer needs with its independently produced accessories, including folding tripod, electric vacuum mount, magnetic mount, stand extension, and probe kit. These accessories are compatible with different types of portable arm, CMM and laser tracker, and can be installed quickly, precisely and firmly at the production site.
● Unfold and adjust the three legs of tripod to the right angle.
● Adjust height of each lifting rod according to site requirements and lock them all.
● According to what internal spirit level displays, adjust lifting rods to keep the tripod standing horizontally on the ground.
● Install the equipment.
● Make sure the tripod stands horizontally on the ground and no debris surrounded before use.
● Please switch off or detach the measuring equipment while adjusting lifting rods to prevent accuracy from being affected or damaged.
● Make sure to check whether the 4 locking devices are fastened up before installing equipment.
● Apply hot melt adhesive at bottom pads of the tripod to keep the stability of the tripod.
730mm
1200mm
470mm
300kg
-15°—55°
18kg
● Fixed Thread Ring: install and fix instrument rigidly on a granite surface.
● Power Button: press and release the power button to start the vacuum mount.
● Pressure Guage: indicate the vacuum degree.
● Battery Indicator Panel: monitor the remaining battery capacity in real time.
● Charging Port: The charge indicator light is green with battery charing to 100%. Use of vacuum mountwhile charging is allowed.
● Pressure Relief Valve: release the vacuum degree.
● Put vacuum mount on a smooth and tidy granite surface for maximum holding effect.
● Please charge vacuum mount in time when battery capacity is less than 25%.
-0.7bar
2000N
12V,3400mAh
150mm
76mm
7.5kg
桿-1738736644.webp)
.svg)
